Set up Canon Pixma Printer Wireless without CD On Windows

  • Home
  • Blogs
  • Set up Canon Pixma Printer Wireless without CD On Windows


220616041107install-canon-printer-e410-without-cdjpg.jpg

Looking for different ways to connect your pixma printer without a CD. If you own a pixma printer, then you must have noticed the WPS or Wi-Fi Protected Setup feature on it. This is provided to set up your computer without a CD. In fact, you are not even required to put in a password to get your ij start canon printer running.

In addition to that, you can also set up your printer by using the standard connection method. This is where you can connect the device using manuals. This works for both Windows as well as Mac users. This blog will take you through the standard method used in Windows. Furthermore, you will also find a step-by-step ABC that you need to follow for both methods.

WPS Connection Method

Before getting into the process, you need to make sure if your printer can actually support WPS. To do so, look if your printer has a WPS push button available. If you are unable to locate it, try the guide that the company provides along with the product.

Next, ensure if you are using a network that has security protocol WPA or WPA2. If not, then you will not be able to go ahead with this method.

Steps Involved

Now that you have checked the eligibility go along the steps mentioned below to connect your desktop with ij start cannon printer.

  • Turn on your printer by pushing the red power button.

  • Now, long-press the Wi-Fi button. Release it only when you see an orange light flashing once.

  • Next, wait for the Wi-Fi flash to turn blue. Within two minutes, get to the access point and hit the WPS button. If you are having trouble looking for the access point or about the WPS button, you can simply refer to the manual provided with the product.

  • Once done, you will notice that the blue light will start blinking. This means that it is looking for an available network.

  • Also, ensure that the green power light starts blinking too.

  • Once the device connects, both lights will stop blinking and will remain lit.

You can now check if your printer is connected by making a copy of any of your documents.

Standard Connection Method

This method works both with or without CD. Now to go ahead without a CD, you need to follow the instructions provided below:

  1. Firstly, you need to install the manuals and software to continue with the process. This is available on the official site of Canon or check out ij.start.canon.

  2. Here, you can choose the manual that matches your product type, Windows, and other specific details.

  3. Once you are done with the manual instructions and have entered the canon’s initial page, simply click on Next.

  4. On the following page, you will find two options. Here, click on the Wireless LAN Connection and then hit Next.

  5. Furthermore, click on Access Point Connection and again move to the next page.

  6. On the next page, click Next if your ij start cannon printer is turned on and has its green lamp light on.

  7. Now, wait for the software to look for your device. You will either find it in the list provided or have to click Setting Printer could not be found on the list if you are connecting a new device.

  8. Wait for the installation to get over, and once done, hit Next.

  9. On the following page, select Cableless Setup and wait for the next page.

  10. Now, it is time to turn on the Wi-Fi of your printer. Press the button till the orange light blinks twice, and then click on Next.

  11. Once the green lamp is on, again click on Next.

  12. A pop-up will appear on your screen.

  13. Now that your devices are connected select the region you are currently in and language and hit Next.

  14. Moving ahead, a Software Installation List will appear on your screen. Select the one you want to go ahead with and continue.

  15. Next, agree to the license agreement by clicking Yes and then click Next when you are requested for the Install Wizard Permission.

  16. Let the installation get over and wait till the software connects with your printer. In case it is unable to look for the same, hit Redetect button and wait again.

  17. Once you see your printer on your screen, click on Complete and then tap on Execute on the Printer Head Alignment page.

  18. Finally, you will see a couple of pages to register your device, take a survey, and go for a test print. These are skippable for now,

  19. Lastly, click on the Exit button once the installation of your ij start canon printer is done.

Final Words

Installing pixma ij start canon printer might seem like a lengthy process, but in real-time, it hardly takes a few minutes. You can either go ahead with the WPS method or follow the Standard Connection Method. However, if you need any further assistance or are struggling to get through the process, you can refer to our website ij.start.canon for help.

FAQs

1. How can I install a pixma printer without the CD?

To install a pixma printer without CD, head to the Control Panel in select Devices and Printers. Next, click on Add Printer and select the one that you want to work with from the list. Finally, go ahead with the instructions available on your screen, and you are done.

2. Can I use my pixma printer without the software?

You can only use the pixma printer without the needed software if you have the USB cable with you. Another option is to get the older version of the software if this is where you are struggling.

3. How to make my desktop recognize my pixma ij start canon printer?

If your pc does not recognise your printer, simply switch it off. Once it’s off, put out the power cord from the printer and wait for 30-40 seconds. Now, reconnect the cable and turn on the power button. Try and connect the printer again.

4. What is the most common reason behind pixma printer not connecting?

The most common reason why your printer is not connecting could be that you tried to install the printer driver with printer’s power off. Always remember to turn on the printer after you finish installing the driver.